Infinity Customs
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
Infinity Customs
Well I have got my press put together and my heat blanket is in progress
I can't wait to start making skis
I can't wait to start making skis
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
-
- Posts: 2204
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
haha ya my friend was riding the skis when he hit some crud and the topsheet just delaminated from the chatter. also it was our first pair and they were absolute garbage, we rode them once and now they just sit up in the rafters.
As for the camber of the 2nd pair I never noticed wavyness in the base like that before and it doesn't seem to affect the ride. However our mold was not very flat, so that could have cause the wavy camber.
As for the camber of the 2nd pair I never noticed wavyness in the base like that before and it doesn't seem to affect the ride. However our mold was not very flat, so that could have cause the wavy camber.
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
just glued up the sidewalls on one of my skis and seemed to go ok, but i have a few questions. Used a heating system of a halogen light and a hair dryer.
Do you guys heat your epoxy while gluing up sidewalls ?
How to you keep it from being super messy? cause now my clamps are wrecked and covered in epoxy.
[/img]
[/img]
[/img]
Do you guys heat your epoxy while gluing up sidewalls ?
How to you keep it from being super messy? cause now my clamps are wrecked and covered in epoxy.
[/img]
[/img]
[/img]
-
- Posts: 73
- Joined: Mon Sep 10, 2012 6:22 pm
- Location: South Eastern Pennsylvania
A few of your photos show quite a few knots in your core timber. You don't want that. You're hand selecting the wood for your core so take the opportunity to pick the best pieces. A knot is pretty much just a plug floating around causing a big weak spot.
You also want to take the time to sort out your press and molds. The camber in those first pairs is all over the place. You need to get the main basics sorted or you will never press a good ski.
You also want to take the time to sort out your press and molds. The camber in those first pairs is all over the place. You need to get the main basics sorted or you will never press a good ski.
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
Ya im with you on the knots, it's not very good for the flex pattern and durability. But i already have a huge block that i cut my cores out of and I dont want to throw away all that wood. Also I bought that wood from home depot and it's not very high quality and the pieces that have the knots are mostly the pine pieces. And im probably gonna stop using that for cores as they tend to have too many knots.
As for the camber I dont think it matters that much and i couldn't feel it at all. That was because the skis were SUPER flexible( I tail pressed them so hard one time that I fell over backwards ) and since they are so flexible, you can hardly notice the wavyness.
As for the camber I dont think it matters that much and i couldn't feel it at all. That was because the skis were SUPER flexible( I tail pressed them so hard one time that I fell over backwards ) and since they are so flexible, you can hardly notice the wavyness.
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
Wow, thats a great idea i will definetly do that for my next pair. I will still use epoxy for my other ski tho, just to keep it consistent.I find that epoxy is not necessary. I just sand and flame the sidewalls then attach with gorilla glue. It's super strong and expands so it fills all the voids. Any glue outside of what's being clamped foams up and is relatively easy to clean up
I never had great results with gorilla glue. It could be easily pulled off the wood with just my hands and was always iffy when profiling with the planer. Epoxy is a much stronger bond and now with something like 35 pairs of core using sidewall bonded directly to a 6mm hardwood backer. I've had only one failure this way, But this was due to dull planer blades not the epoxy. There is now way to pull the sidewall off the wood with just your hands.
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
www.Whiteroomcustomskis.com
-
- Posts: 87
- Joined: Tue Dec 27, 2011 12:02 pm
Sounds like a good idea, but what exactly is hardwood backer? is it a type of double sided tape??I never had great results with gorilla glue. It could be easily pulled off the wood with just my hands and was always iffy when profiling with the planer. Epoxy is a much stronger bond and now with something like 35 pairs of core using sidewall bonded directly to a 6mm hardwood backer. I've had only one failure this way, But this was due to dull planer blades not the epoxy. There is now way to pull the sidewall off the wood with just your hands.