How much epoxy per pair of skis?
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 61
- Joined: Sat Feb 04, 2012 5:04 pm
- Location: New Hampshire
How much epoxy per pair of skis?
I know it varies depending on what you use but just post what you are using and how much epoxy you use per pair.
I would like to get entropy but I want to figure out how much I need to order. I don´t want to over/underorder.
Thanks
I would like to get entropy but I want to figure out how much I need to order. I don´t want to over/underorder.
Thanks
-
- Posts: 61
- Joined: Sat Feb 04, 2012 5:04 pm
- Location: New Hampshire
I typically mix 800g for a 185 cm ski. I may try to get away with less. Something around 700-750g since I usually have about 100g give or take left over.
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
www.Whiteroomcustomskis.com
also, i see your in NH...these guys sell entropy resins, can probably save on shipping coming from RI versus entropy hq in Cali
http://www.jamestowndistributors.com/
http://www.jamestowndistributors.com/
-
- Posts: 61
- Joined: Sat Feb 04, 2012 5:04 pm
- Location: New Hampshire
whoa thanks a ton for showing me that
it's sort of a one stop shop because they have a lot of composite materials too, although they didn't have the entropy CPM resin which is their compression molding specific resin. I'm not sure if any of the other resins would work, does it have to be a compression molding resin specifically or can it be any resin?
it's sort of a one stop shop because they have a lot of composite materials too, although they didn't have the entropy CPM resin which is their compression molding specific resin. I'm not sure if any of the other resins would work, does it have to be a compression molding resin specifically or can it be any resin?
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
WOW thxBuz wrote:also, i see your in NH...these guys sell entropy resins, can probably save on shipping coming from RI versus entropy hq in Cali
http://www.jamestowndistributors.com/
Jamestown distributors not too far from me . If they have it... probably Comprising One have Entropy too. Only Jamestown website showing no super sap CPM.
100/1000 for press without heat?
-
- Posts: 61
- Joined: Sat Feb 04, 2012 5:04 pm
- Location: New Hampshire
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
-
- Posts: 61
- Joined: Sat Feb 04, 2012 5:04 pm
- Location: New Hampshire
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact:
-
- Posts: 61
- Joined: Sat Feb 04, 2012 5:04 pm
- Location: New Hampshire