Ski Builders Forum

Sold/ Donated to someone who will help me get the rest of my project finished. Thanks Ski-Builders!



I have run out of time and resources to complete this project. I have the following items for sale. These items are located in Watsonville CA near Santa Cruz CA. I may be willing to ship some of the items, but I would prefer local pick-up of all items. I have acess to a forklift for loading the materials. Below are the prices that I paid for these items.... These are cut and pastes of the receipts. Please make an offer!

mat-ironfiling50g Iron filings, 50 grams $0.75
(Not Taxable) 10 $7.50
mat-7mmM6 7mm M6 binding inserts $0.40
(Not Taxable) 64 $25.60
mat-10mmM5 10mm M5 Binding Inserts $0.40
(Not Taxable) 64 $25.60
Subtotal Amount : $58.70
Discount : $0.00
Shipping and Handling (FedEx - FedEx Ground Business Delivery) : $10.24
Tax Amount : $0.00
Total Amount : $68.94


100 Fiberglass 22oz x 13" triax 2.50 250.00
5 Fiberglass peel ply 7.75 38.75
1 Accesories partall wax 12.75 12.75
1 Accesories qt cover all liquid 9.75 9.75
Subtotal 311.25
UPS Shipping UPS Shipping Charges 37.50 37.5

5 Gallons of Medium Viscosity Epoxy Resin
1 Gallon Pail of Epoxy Hardener

1 Fire Hose Complete
1 Cat Track Complete
2 Presses about 10.5"x8'x appropriate height.

Enough Dura Surf Petex for about 30 pairs of skis
Enough Edges for about 30 pairs of skis
Dispensers and Cups for Epoxy

Please contact me via E-mail or phone if you have any questions...

Frank
831-325-5589

E-mail me for a link to the pictures on PhotoBucket

Check out the pictures on photobucket to see the other stuff I do not have listed.

There are 44 5' edges
There are 44 7' edges

The presses measure
8'x10"x14.75 and 8'x10x15.75"

These numbers are cut and pastes of my receipts for these items. Please make offers on the materials!

Frank
850-325-5589
Might Deliver in Lake Tahoe Area if there is snow around!

It's time to go skiing!

Dude thats so sweet its like a turnkey factory almost everything you need to get started! Nice design on the press it looks rugged as hell if not a bit overbuilt...

Id jump on some of that in a heart beat if you were near me... I think Im about the only guy trying to make skiis in Florida though.

Why only one bladder? Thats really what I need I made my own fabric press already... would you sell that seperately? How much? Send me a PM about it if thats OK.

Hey also was that a heating blanket I saw in one of the photos? You did not list on materials list... how much for the heating blanket also?

Just make me an offer on the blanket and the heat mats. I am negotiable...

F

how much for the bladder, frame, and cat track? and where are you located?

Thanks I didn't catch that, it was late lol. But anyway how much for the press, bladder, and cat track? And how much with second press?

Hey Green, sent you a pm about your shop. I am particularly interested in the ptex bases, the edges, the aluminum pressing track, and the epoxy resin and hardener. You had yet to post any pricing ranges for those materials so I was just a little curious!