Freestyle TWIN with ZERO CAMBER
Posted: Thu Nov 17, 2011 2:12 am
Hello,
i have some questions... I am designing my first snowboard and wanted to make it a true twintip with zero camber. but i do have some questions on the flex. First of all, i am 1m62 and weigh about 68kg, my weight should go down to 60-62kg, i designed my board with a length of 150cm, my tips are 180mm in length and 290mm in width, my thickness like it now is, is the following: 3mm - 6mm (Outboard 300mm - Inboard 400mm) - 6mm - 6mm (Outboard 300mm - Inboard 400mm) - 3mm. Is this a good flex? or should i make it stiffer or not?
In some area's i'm going to place carbon tape to make it absorb some power.
Kind regards from Belgium...
i have some questions... I am designing my first snowboard and wanted to make it a true twintip with zero camber. but i do have some questions on the flex. First of all, i am 1m62 and weigh about 68kg, my weight should go down to 60-62kg, i designed my board with a length of 150cm, my tips are 180mm in length and 290mm in width, my thickness like it now is, is the following: 3mm - 6mm (Outboard 300mm - Inboard 400mm) - 6mm - 6mm (Outboard 300mm - Inboard 400mm) - 3mm. Is this a good flex? or should i make it stiffer or not?
In some area's i'm going to place carbon tape to make it absorb some power.
Kind regards from Belgium...