Stone Grinder... $500.00 OBO????
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Stone Grinder... $500.00 OBO????
[/img][/img][/img][/img]stone grinder for sale. Don't know much about it. I have all the information to put a larger stone on it (up to 7") without to much work. It also has a power feed that is not pictured. Some of the switches have been broken off, but they still work. It also has a "dressor" for the stone that has a variable speed. Send me a pm and i can get you more info and photo's if need be. Not sure what this is worth, i just don't need it. thanks... will ship if need to.
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
-
- Posts: 85
- Joined: Thu Dec 22, 2011 8:41 am
- Location: Tacoma, Washington, USA! USA!
- Contact:
i live in washington
is it possible to get that thing to washington?
Stone from National Abrasives?????
Hi, sorry to hijack but I was wondering if you guys can help me out?
A wee while back I scored a Montana stone grinder robot for $100, its mint really, just the stone is munted. A new Montana stone is like $1500 or something here in NZ.
Anyway I really would like it to be more like 160mm wide so I can get a splitboard through it. Will need a few pnumatic ram tweaks to make the dresser go the new stone width and maybe a few others, not worried about the robot I will convert it to roller autofeed like a typical board grinder.
I couldn't find National Abrasives online , the web url goes to nowhere, do any of you have a contact for them? Hopefully they can help with a custom stone for my machine maybe?
cheers
Rich
A wee while back I scored a Montana stone grinder robot for $100, its mint really, just the stone is munted. A new Montana stone is like $1500 or something here in NZ.
Anyway I really would like it to be more like 160mm wide so I can get a splitboard through it. Will need a few pnumatic ram tweaks to make the dresser go the new stone width and maybe a few others, not worried about the robot I will convert it to roller autofeed like a typical board grinder.
I couldn't find National Abrasives online , the web url goes to nowhere, do any of you have a contact for them? Hopefully they can help with a custom stone for my machine maybe?
cheers
Rich
MonkeyCAM and SnoCAD - https://github.com/mikemag
Ski binding mounting https://github.com/splitn2/DrillSki
Richard Harcourt | www.splitn2.com | Christchurch New Zealand
rich@splitn2.com | www.facebook.com/splitn2
Ski binding mounting https://github.com/splitn2/DrillSki
Richard Harcourt | www.splitn2.com | Christchurch New Zealand
rich@splitn2.com | www.facebook.com/splitn2
-
- Posts: 146
- Joined: Mon Jun 13, 2011 9:02 am
- Location: Salt Lake
- Contact: