For discussions related to the type of materials to build skis/snowboards and where to get them.
Moderators: Head Monkey , kelvin , bigKam , skidesmond , chrismp
artski
Posts: 149 Joined: Tue Oct 13, 2009 8:48 am
Location: Boyne country, Mich.
Post
by artski » Wed Nov 09, 2011 1:00 pm
I am adding heat to my press. I want to stay with qcm epoxy, going to get it from Forrest, 0049 resin and 032 hardener.
I still have a gallon of the 045 left can I use it with heat?
artski
Posts: 149 Joined: Tue Oct 13, 2009 8:48 am
Location: Boyne country, Mich.
Post
by artski » Thu Nov 10, 2011 6:20 pm
sorry, I have a gallon of 0043 left. Will that work with a heated press?
I can't find any data on the old qcm epoxies on the old site qcminds. It just connects me to Forrest paints and they don't have any info on epoxy at their site.
knightsofnii
Posts: 1148 Joined: Tue Jan 08, 2008 6:02 am
Location: NJ USA
Contact:
Post
by knightsofnii » Sun Nov 13, 2011 9:42 am
emv043 and eca 032 work fine with a heated press, if it's 032 dont take it over 180, that's what i was told.
Doug
artski
Posts: 149 Joined: Tue Oct 13, 2009 8:48 am
Location: Boyne country, Mich.
Post
by artski » Sun Nov 13, 2011 3:45 pm
Thanks alot Doug, I kind of thought it would be alright but just thought I'd run it by you guys.
,art