adding traction steps, scales, or mohair to my skis
Posted: Sat Oct 08, 2011 12:05 pm
This is something I have been pondering for a bit and just am not sure of the way to attack it.
I have a pair of older 205cm cross country skis with metal edges that i am tired of waxing and am thinking of adding some kind of steps to the base.
My plan was to use a knife to cut steps into the base for added traction, I imagine this will be a time consuming process but am wondering if it will be worth it. Or if there is a better way to achieve my desired result.
I did a search but didn't come up with anything.
Thanks for any input ....
G
I have a pair of older 205cm cross country skis with metal edges that i am tired of waxing and am thinking of adding some kind of steps to the base.
My plan was to use a knife to cut steps into the base for added traction, I imagine this will be a time consuming process but am wondering if it will be worth it. Or if there is a better way to achieve my desired result.
I did a search but didn't come up with anything.
Thanks for any input ....
G