Any board builders in the B.C. Canada neighborhood?

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
kungpowd
Posts: 6
Joined: Fri May 20, 2011 1:35 am
Location: Canuckaye

Any board builders in the B.C. Canada neighborhood?

Post by kungpowd »

I am a loooong time lurker and brand new member.Just curious if there were any board or ski builders in the B.C. or surrounding area's that would care to bulk order materials in the future,like heat blankets ,vds,edges,topsheet and base material and all.Perhaps share some idear'z over a beer er cup o joe, if possible.I know this is not the place for such a post,but i figured it may see the most traffic.I won't post in the wrong place again. Thanks
sammer
Posts: 933
Joined: Wed Dec 19, 2007 10:37 pm
Location: Fernie B.C.
Contact:

Post by sammer »

Where in B.C. are you?

I know someone on here (can't remember who) was from Golden.
Thinking redbull was from Vernon?
I know there was at least one from Whistler /Squamish.
It's a damn big province.

I've got enough materials to last me a while.
At least until I get a garage!

sam
You don't even have a legit signature, nothing to reveal who you are and what you do...

Best of luck to you. (uneva)
User avatar
skibum
Posts: 54
Joined: Wed Jan 27, 2010 8:04 am

Post by skibum »

I'm in Whistler. I will need to order a few things soonish. I normally ship it to Sumas then bring it over myself.
Where do you live?
Post Reply