My press almost complete and some pics finally!

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
User avatar
richie
Posts: 184
Joined: Wed Jun 23, 2010 7:25 pm
Location: New Zealand
Contact:
Contact richie

My press almost complete and some pics finally!

Post by richie »

Hi Guys, finally I have a few pics of my press construction online, on a gallery , check them out! its been a mission but I am winning slowly, heat blanket and controller to build next.....cheers, Rich

my gallery is under my username "richie"

http://www.skibuilders.com/cpg/index.php?cat=10033

Thanks Kam for setting my gallery up!
MonkeyCAM and SnoCAD - https://github.com/mikemag
Ski binding mounting https://github.com/splitn2/DrillSki

Richard Harcourt | www.splitn2.com | Christchurch New Zealand
rich@splitn2.com | www.facebook.com/splitn2
Top
skidesmond
Posts: 2338
Joined: Tue Apr 07, 2009 3:26 pm
Location: Western Mass, USA
Contact:
Contact skidesmond

Post by skidesmond »

Wow!, all these big steel I beam presses lately... Very nice!
Top
User avatar
Brazen
Posts: 841
Joined: Thu Nov 25, 2010 11:26 am
Location: San Bernardino, CA
Contact:
Contact Brazen

Post by Brazen »

That's killer. I love the secret agent wheels ))
Top
Post Reply

Return to “Equipment and Tools (e.g., ski press, core profiler, etc)”