setup help

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
ianman77
Posts: 1
Joined: Wed Feb 15, 2006 6:00 pm

setup help

Post by ianman77 »

i've never made a pair of skis before but i have repared snowboards before, i need some help on designing a skipress, getting snowcad2 to work and all the other things that go with making skis, thanxs alot
Top
User avatar
hose-man
Posts: 167
Joined: Tue Aug 02, 2005 11:17 am

Post by hose-man »

Start reading HERE

make sure you visit all the topics in the red text on the left side.

Have fun & get out your wallet because the first pair is a little expensive. After that they should get cheaper.
Top
Post Reply

Return to “Equipment and Tools (e.g., ski press, core profiler, etc)”