Page 1 of 1
core profilers
Posted: Tue Oct 12, 2010 7:25 pm
by EricW
So I've been looking at router bridge type of profilers. The only one I like so far is the one that Kingswood uses.
http://www.skibuilders.com/phpBB2/viewt ... =kingswood
It looks like 1" conduit with bolts for adjusting. Anyone have more insight this?
Posted: Tue Oct 12, 2010 7:39 pm
by originskis
mine is just like that except instead of the metal rails i used primed mdf moulding. its super cheap and works great. to give it a curve i shim it up with washers i found that are exactly 1mm, then put a screw through the middle of them and kapeesh. if i get around to it i might put some pics up.
Posted: Tue Oct 12, 2010 8:16 pm
by sammer
Yup I'd say MDF molding is the way to go.
I knew I should have patented it
http://www.skibuilders.com/phpBB2/viewtopic.php?t=1326
Doesn't take much for shims to make it solid.
sam
Posted: Thu Oct 14, 2010 7:34 pm
by originskis
haha yeah. i got the mdf idea from you (thanks a BUNCH!) but use the washers instead. they are bomber solid.
Posted: Wed Oct 20, 2010 2:24 pm
by OnDeck
Jsut saw this (MDF and shims). Goddamn brilliant! It's, literally, something i could run home and try tonight.
Posted: Wed Oct 20, 2010 3:04 pm
by EricW
OnDeck wrote:Goddamn brilliant!
That's what I said when I saw that. My wife didn't get it.
Posted: Wed Oct 20, 2010 8:06 pm
by sammer
Thanks, my ego needed that
Too late to patent! I've already made it public.
sam