This is what I can get locally, unfortunately QCM isn't a local company : ( thks in advance!
CURING:
Workshop conditions 18 to 25ºC, 70% humidity maximum.
Pot life 40 minutes (100g@23ºC)
Film touch dry 2½ hours.
Film hard and sandable 12 hours.
Full cure 7 days or post cure for 8 hours @ 60ºC.
MECHANICAL PROPERTIES
Tensile strength 80 MPa.
Flexural strength 120 MPa
Tensile modulus 3,500 MPa
Flexural modulus 3,400 MPa
Tg. 50ºC (20ºC cure)
Max Tg. 75ºC (8h @ 60ºC)
PHYSICAL PROPERTIES
Resin aspect Purple liquid
Hardener aspect Clear liquid
Resin viscosity 1,500 mPas
Hardener viscosity 70 mPas
Viscosity of mixture 400 mPas
Density of mixture 1.1
Above values at 23ºC
Local epoxy - good enough?
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp