can you epoxy the tip spacers to the wood?

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
seth3030
Posts: 8
Joined: Wed Apr 13, 2005 12:07 pm
Location: Spokane

can you epoxy the tip spacers to the wood?

Post by seth3030 »

can you epoxy the tip spacers to the wood before you put it into the mold so it holds it togeather throught the whole process?
Top
User avatar
littleKam
Site Admin
Posts: 269
Joined: Mon Dec 13, 2004 7:43 pm
Location: SoCal

Post by littleKam »

i put tabs of epoxy onto my tipspacers and it works well. i try not to put too much epoxy though. just enough to hold them in place.
- Kam S Leang (aka Little Kam)
Top
User avatar
rasi
Posts: 12
Joined: Mon Jul 11, 2005 9:43 am
Location: Fribourg, CH // Baiersbronn, DE

Post by rasi »

I had the same problem and simply attached the tipspacers with a short rubber strip (the same as laminated above the edge) and super glue.
Top
Post Reply

Return to “Ski/Snowboard Design and Layup”