pressing skis with precured fiberglass

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
madclimber03
Posts: 20
Joined: Fri Jun 29, 2007 7:54 am
Location: Jackson, WY

pressing skis with precured fiberglass

Post by madclimber03 »

I've pressed a few skis with sheets of fiberglass and then adding the epoxy but is there anything different that i should expect with the precured stuff. Its ready to bond on both sides. Any suggestions or knowledge would help.
Top
Post Reply

Return to “Ski/Snowboard Design and Layup”