Page 1 of 1
Writeup: Core Profiling
Posted: Wed Mar 11, 2009 11:02 pm
by Damon
This was a bit of a last minute writeup. Anyone see any errors? (besides video - trying to get those to work...)
http://myweb.students.wwu.edu/~calld/planing/index.html
Posted: Thu Mar 12, 2009 6:39 am
by rockaukum
Looks good. How did it work?
the only thing I saw, which may not be a mistake, is this:
Required Materials:
The following materials will need to be purchased:
(1) 48x96" 1/4" MDF
(1) 48x96" 1/8" plywood
(3) 10' 2x4
(1) 50 count box of 1-1/4" wood screws
You state the MDF is the base. In the pictures the MDF looks to be 1/2 or even 5/8" thick. So is the measurement in the Materials and the text correct?
ra
Posted: Thu Mar 12, 2009 11:09 am
by Damon
Good catch! Yeah supposed to be 1/2"
Posted: Thu Mar 12, 2009 10:57 pm
by Damon
Video's added.
Haven't had a chance to run it through yet
Posted: Thu Mar 19, 2009 1:31 pm
by Buuk
