Page 1 of 1
Custom Built CNC Router
Posted: Thu Jan 15, 2009 8:49 pm
by bjslater
Selling a brand new custom built CNC Router, all welded steel frame, oversized linear rails, 24"X72" table, 4"z height, rack and pinion drive on X and Y axis, lead screw drive on z axiz, removable legs, dual drive on the x axis. This machine is brand new, it is just not finished yet. All it needs is motors, (I have several motors, we may be able to work something out on adding those in)and a spindle. It has a complete 4 axis control that is complete that will run off your PC, all the wiring is complete, just connect the motors to the wiring. 110 Volt, single phase required, has a 10 amp per motor stepper driver to provide tons of torque. Originally designed to machine snowboard and ski cores. Great machine, just needs the finishing touches. Asking $2500.00
Posted: Tue Jan 20, 2009 6:42 pm
by Oliver Moore
got any pictures?
Posted: Wed Jan 21, 2009 2:11 am
by hugocacola
Helo Bjslater did you ship overseas???
Best regards
info/shipping
Posted: Wed Jan 21, 2009 8:23 am
by bjslater
Hello, Yes I do have pics and I will ship overseas. I am having troubles posting pics to the forum. Please PM me to get pics.
Thanks!
Posted: Wed Jan 21, 2009 10:13 am
by ben_mtl
I think you need to have at least 2 messages posted before you can add pics, now you should be good.
I'm really interested in seeing what it looks like.
Posted: Tue Jan 27, 2009 12:13 pm
by Powforbreakfast.
Me as well! ^^
Posted: Wed Feb 04, 2009 2:38 pm
by airhoag
Interested in pics.
Pics,
Posted: Mon Feb 09, 2009 8:27 pm
by bjslater
Please PM me for pics, as I do not have enough posts yet to post pics.
Thanks!
BJ
Pics located here
Posted: Mon Feb 09, 2009 8:29 pm
by bjslater