Page 1 of 1
yeah
Posted: Mon Dec 01, 2008 11:30 pm
by Three31
Finally finished getting everything set up in my new garage (moved from Tahoe to Reno for School), and made some time to press some boards out.
Lots of Love
The core is thicker than the tip spacer, so added a couple of pieces of glass for the transition.
--Never thought I'd see my last name on a pair of skis--
Heating up
Ready to cut.
-----------------
Kam,
Once I got started, I had to keep running.
-----------------
Posted: Tue Dec 02, 2008 3:35 pm
by MontuckyMadman
ROCKIN'!!!
Posted: Tue Dec 02, 2008 3:44 pm
by brandt
Really sweet graphics.
Posted: Tue Dec 02, 2008 10:23 pm
by Three31
Thanks, its taken a lot of work.
Here they are cut out.
Posted: Tue Dec 02, 2008 10:27 pm
by allyson
brian, those skis look awesome!!! now...if only there was some snow around here to test them on...
Posted: Thu Dec 11, 2008 3:54 am
by Mongo
Excellent looking skis. What was the thickness difference between your core and tipspacer that you stepped with the glass? How did the fit come out?
Second question, who did you use to print your topsheet graphics and what material is it?
Keep up the solid work.
Posted: Thu Dec 11, 2008 6:16 pm
by Grizzly Adams
Killer skis, Killer moustache!
Posted: Sat Dec 13, 2008 4:10 pm
by Three31
The core to tip spacer step was about 2.5 mm, and it came out smooth. Used 2 pieces of glass, one about 2 inches long and another 4 inch piece over that.
I had the graphics printed here in Reno at Moment.
You can also get topsheet printed through snowboardmaterials.com
The material is PBT.
Thanks, the moustache takes a bit of work too, but its worth it!