Hey there,
This site is awesome! I have worked in the laminate/ski/hockey stick industry for quite some time- i am looking at building a Ski mold and was wondering if anyone has drawings for the camber and shape required for a 184 cm base mold?
I am looking at using some new materials for skis that will be destined for Alpine tourning and Big mountain decents.
Best regards,
mikeB
BASE MOLD DRAWINGS
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
- Posts: 2
- Joined: Sun Mar 23, 2008 10:21 am
Mold Drawings...
Any drawings would be apprechiated- PDF would be awesome-
We have a couple of CORE, Glass and laminate companies up here who supply the Ski and hockey industrys- I am looking at building some molds and testing some new techical materials includind ceramics and carbon socks wraps- we also are looking at building some composite cores and using micro balloons in our resin systems to reduce the final weight of the skis we build.
Those PDF s would be awesome- Also if anyone can give me insight as to how you calculate your core dimensions- what is the shrinkage after the actual ski cures?
Please send all you have to : mwburchmore@gmail.com
I will keep in touch with all who contribute( and all who dont!!) i want to share it is the best way to build better products.
Ciao
mikeb
We have a couple of CORE, Glass and laminate companies up here who supply the Ski and hockey industrys- I am looking at building some molds and testing some new techical materials includind ceramics and carbon socks wraps- we also are looking at building some composite cores and using micro balloons in our resin systems to reduce the final weight of the skis we build.
Those PDF s would be awesome- Also if anyone can give me insight as to how you calculate your core dimensions- what is the shrinkage after the actual ski cures?
Please send all you have to : mwburchmore@gmail.com
I will keep in touch with all who contribute( and all who dont!!) i want to share it is the best way to build better products.
Ciao
mikeb
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact:
Base Mold Drawings
I know this post is old. I hope it's still be followed but I too am looking into building an adjustable mold for skis that will work for 160cm - 180 or 185 cm. I'm trying to work through a design now but would love to skip the trial and error steps . The camber will be consistent for all lengths. Well if I get one that works out I'll post how I did it.
-
- Posts: 2337
- Joined: Tue Apr 07, 2009 3:26 pm
- Location: Western Mass, USA
- Contact:
Base Mold Drawings
I found a simple adjustable mold on the website here, http://www.skibuilders.com/phpBB2/viewtopic.php?t=91
As for the camber being consistent, ie 10-12 mm camber for all lengths of skis from a 155 - 180 cm, that is more of a challenge than I want to handle at the moment. To keep a 10-12 mm camber for all lengths will be a future project.
As for the camber being consistent, ie 10-12 mm camber for all lengths of skis from a 155 - 180 cm, that is more of a challenge than I want to handle at the moment. To keep a 10-12 mm camber for all lengths will be a future project.