For Sale: Press frame, bladder, other misc. stuff
Posted: Sat Dec 29, 2007 12:18 pm
I am going to be overseas for the next several years and won't be needing ski building stuff here in the USA. Plus, my parents have been pestering me about getting rid of some of my stuff that is at their house, so here is what I have available for sale for any reasonable offer (the more you take and the cooler you are, the better the price 
A single ski press frame built of square tubing like the design done by LittleKam
A firehose bladder
A basic compressor (cheap)
A top mold
about 1 gallon of epoxy and enough hardener to match (QCM brand)
lots of other miscellaneous stuff like patterns, end molds, and other supplies
And, I could probably throw in some base material (I have blue and orangish-red)
I can get you pictures if you want, but it is all pretty standard stuff.
Everything is located in Bellingham, Washington, USA and I am not really interested in shipping, but would be more than happy to figure out delivery to the Seattle area.
Oh, and this offer is only good for this month (January 2008). After that, I will be setting up shop in Sweden.
A single ski press frame built of square tubing like the design done by LittleKam
A firehose bladder
A basic compressor (cheap)
A top mold
about 1 gallon of epoxy and enough hardener to match (QCM brand)
lots of other miscellaneous stuff like patterns, end molds, and other supplies
And, I could probably throw in some base material (I have blue and orangish-red)
I can get you pictures if you want, but it is all pretty standard stuff.
Everything is located in Bellingham, Washington, USA and I am not really interested in shipping, but would be more than happy to figure out delivery to the Seattle area.
Oh, and this offer is only good for this month (January 2008). After that, I will be setting up shop in Sweden.