For discussions related to the type of materials to build skis/snowboards and where to get them.
Moderators: Head Monkey , kelvin , bigKam , skidesmond , chrismp
krp8128
Posts: 367 Joined: Fri Feb 23, 2007 1:57 pm
Location: Marcellus, NY
Post
by krp8128 » Tue Nov 20, 2007 8:52 am
Ok, on October 10th, they were in stock. Somebody out there must be busy, as it seems like that only lasted a few days!
Any time line for new stock? I kind of screwed up the last ski and would like to get at least one pair ready for snow around Christmas...
bigKam
Site Admin
Posts: 538 Joined: Tue Feb 01, 2005 5:15 pm
Location: Park City, Utah
Contact:
Post
by bigKam » Wed Nov 21, 2007 9:39 pm
edges are in stock!
icanryme2002
Posts: 7 Joined: Fri Dec 28, 2007 6:40 pm
Location: Canada
Post
by icanryme2002 » Tue Jan 01, 2008 5:37 pm
Not anymore
Ladies and Gentlemen take my advice, pull down your pants and slide on the ice.
bigKam
Site Admin
Posts: 538 Joined: Tue Feb 01, 2005 5:15 pm
Location: Park City, Utah
Contact:
Post
by bigKam » Thu Jan 03, 2008 10:11 pm
Hi everyone,
We have more edges in stock. We now carry standard edges ($0.25 cheaper), and they are not sand blasted or treated, so you will need to either sand blast them or use fine-grit sand paper to abrade the surfaces to improve bonding.