Page 11 of 23
Posted: Fri Nov 08, 2013 8:08 am
by backyardskier
Did you cut a release for the edges? Looks like you just laid them right on top of the base.
Posted: Fri Nov 08, 2013 9:37 am
by Dtrain
backyardskier wrote:Did you cut a release for the edges? Looks like you just laid them right on top of the base.
yup! my base templates are cut with a couple mm's recess for the edges. they just look like their laid on there maybe because......there so perfectly fitted .hahahha
Posted: Wed Nov 20, 2013 8:03 pm
by Dtrain
Got a couple things pressed a few night ago. Another set of our reversed camber/sidecut pow skis. Also a 159 twin snowboard. Camber underfoot. Some reverse between the bindings
Ski
multiwood topsheet
Triax basalt
1" 9oz carbon, 6 12k carbon tows
Sitka spruce core.
1" 9oz carbon, 6 12k carbon tows
triax basalt
Vds and edge
Painted crown natural base
Snowboard
multiwood topsheet
Triax basalt
1" 9oz carbon
Bamboo, poplar, maple,paulownia core
1" 9oz carbon, and few other s
Triax basalt
Vds and edge
Painted crown natural base
[/img]
Hopefully get another set pressed tonight[/img]
Posted: Wed Nov 20, 2013 9:52 pm
by gozaimaas
Sweet looking sticks as always
Posted: Wed Nov 20, 2013 11:51 pm
by climberman
Amazing sticks dtrain - maybe the best looking veneer skis I've seen on here! Shape looks great as well.
Posted: Thu Nov 21, 2013 12:26 am
by originskis
I agree with climberman- some of the nicest veneer skis I've ever seen. Nice work. How do you assemble the topsheet with differing veneers? Also, did you stain the "divide" on? Awesome stuff man!
Posted: Thu Nov 21, 2013 1:57 am
by Dtrain
Wow. Thanks for the comments guys. The veneers are just cut straight, butted up against each other and taped with a cloth tape. The logos are actually inlays of other veneers. Very time consuming.
This was the first time we pressed twice in one night. Had all kinds of friends dropping by with beer. I got pretty fuzzy. Surprised they both turned out so nice.
Posted: Thu Nov 21, 2013 3:38 am
by vinman
Love those veneers. I need to do one like that to use up some scrap. Well done.
Posted: Thu Nov 21, 2013 5:13 am
by skimann20
skis? what skis? all I saw was a half naked women on the wall...
seriously though, those are some great looking skis! nice work man.
Posted: Thu Nov 21, 2013 10:45 am
by IslandRider
Dtrain wrote:I wrecked the last one and it hurts. I am squeezing a beer bottle for dear life while bitting my lip, and holding my breathe every time the toolpath is running.
You stuff looks awesome man. Just had to reply because that statement sums up my CNC'ing experience exactly. Hours to make something that will get ruined in less time than it takes to hit the Estop if something goes wrong. Builds character, right?
Posted: Thu Nov 21, 2013 11:33 am
by MontuckyMadman
You guys should check out some other cam software with better preview options. The stuff I have I can slow it down to exactly the same time 1:1 and see whats happening and make measurements if I need to.
Visual mill is made by the rhino people and its pretty dope, has a cad component as well so you can draw all the basic ski stuff.
Posted: Thu Nov 21, 2013 12:28 pm
by Dtrain
Will look into it MM. Where's all your skis man. Have not seen any in a while?
Posted: Thu Nov 21, 2013 3:36 pm
by MontuckyMadman
goin out the door faster than I can take pics. haha.
THis has been a bit of a retooling 6 months.
built a new shop and new machines and all sorts of shit.
Posted: Thu Nov 21, 2013 6:28 pm
by originskis
Dtrain, mind divulging your veneer source? I'd love to do some veneer skis but a)don't know what I'm looking for, and b) can't seem to find any small-volume (and cheaper) source.
Posted: Thu Nov 21, 2013 7:28 pm
by Dtrain
I'll shoot ya a message tommoow