Page 2 of 2
Posted: Mon Sep 01, 2008 3:57 pm
by hydrant71
i use part-all #2 from tap. works good, nothing sticks at all with full epoxy
contact. just want to be on the safe side because i lay it right on top of the wet top laminate of the board.
Posted: Tue Sep 02, 2008 10:25 am
by rockaukum
Hydrant: Thanks I'll look into it.
The first time through I used no release agent. There were no real problems with the top of the skis, however there was remants of the epoxy on the HDPE and had to scrape it off and that left some scratches. The second time I waxed with car wax and all I had to contend with was a slight haze. Anyway it seems to work fine but was just wondering what other options were used.
ra