hi
i am about to make my first board and i am wondering if it is possible to not include a top sheet, instead i would press it without out one and after the epoxy cures, but before i remove the flashing, i would make a top sheet of epoxy by pouring it thinly over the top of the board. is this recommended. the look i am trying to go for is similar to arbor snowboards ( shiny, clear allowing underlying wood grain to be seen)
alternative topsheet methods
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
- MontuckyMadman
- Posts: 2395
- Joined: Fri Jun 20, 2008 9:41 pm
UV can break down epoxy. Use a spar varnish on top to block the UV.
Idris posted a minimalist touring ski that did not seem to have a topsheet on it. He posted it on this site and on TGR.
http://www.skibuilders.com/phpBB2/viewtopic.php?t=1316
Idris posted a minimalist touring ski that did not seem to have a topsheet on it. He posted it on this site and on TGR.
http://www.skibuilders.com/phpBB2/viewtopic.php?t=1316