Hey everyone
I am working on a pair of super light freeride skis and I thought that was a good moment to show everyone how I die cut the base or rather the logo in the base. Maybe this inspires some of you guys to try something similar. The tool was made in maybe two hours and it held up way longer than I would have ever imagined.
Cheers!
quick tip: die cut ski base
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
SleepingAwake
- Posts: 175
- Joined: Mon Oct 11, 2010 11:06 pm
- Contact:
Re: quick tip: die cut ski base
Nice work!!
...somewhere around here i have some letters we did a long time ago. We used the same type of design and a hydraulic press. I'll see if i can find a photo to add.
...somewhere around here i have some letters we did a long time ago. We used the same type of design and a hydraulic press. I'll see if i can find a photo to add.
-
SleepingAwake
- Posts: 175
- Joined: Mon Oct 11, 2010 11:06 pm
- Contact:
Re: quick tip: die cut ski base
realized i wanted to add a picture of how it looks after preparing the base and forgot: 
-
Thelongride
- Posts: 49
- Joined: Thu Jun 06, 2019 8:53 am
- Location: Washington
Re: quick tip: die cut ski base
Thanks for the quick tutorial, seems pretty easy to set up!