Ghetto Tips & Tricks
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
Ghetto Tips & Tricks
Lets show your ghetto stuff. This should be not taken to serious. Just some dirty tricks and stuff to laugh from our daily struggle in a shapers life
I start with my approach to ghetto sublimation
I start with my approach to ghetto sublimation
Tom
Re: Ghetto Tips & Tricks
Lol. Not bad. Still try to figure out how it works. The wheel puzzles me
P.S. use the great new upload function for pics! Much better then photobucket (which complains about my ad blocker)
P.S. use the great new upload function for pics! Much better then photobucket (which complains about my ad blocker)
Tom
Re: Ghetto Tips & Tricks
nice dude!
Would you be so kind to explain your workflow in complete?!
Re: Ghetto Tips & Tricks
I just did a giant post about my first build thus far. Most won't read it I expect. During this I needed a router table and didn't have one so I made one out of MDF, wood screws for a fence, and a standard plunge router. Used it to do the rabbet over the edge and VDS. Worked perfectly.
Last edited by BAR on Wed Mar 20, 2019 12:28 pm, edited 1 time in total.
-
- Posts: 21
- Joined: Tue Oct 24, 2017 1:05 pm
Re: Ghetto Tips & Tricks
Yo BAR, I can't see any photos you have posted either on your main post or on this one..
Re: Ghetto Tips & Tricks
OK I will see if I can edit it to work.
Re: Ghetto Tips & Tricks
Eh, if it's ghetto, but it works, then it isn't ghetto, it's ingenious thanks for the tips anyways, they'll help me since I don't have always an access to the "ideal" tools.
-
- Posts: 712
- Joined: Thu Sep 30, 2010 12:32 pm
- Location: USA
Re: Ghetto Tips & Tricks
this could be very useful to someone who want to build edge Sander.
I have not failed. I've just found 10,000 ways that won't work.
Thomas A. Edison
Thomas A. Edison
Re: Ghetto Tips & Tricks
Just add a angled plate to the top and you can bevel your sidewalls as well!BAR wrote: ↑Wed Mar 20, 2019 11:34 am I just did a giant post about my first build thus far. Most won't read it I expect. During this I needed a router table and didn't have one so I made one out of MDF, wood screws for a fence, and a standard plunge router. Used it to do the rabbet over the edge and VDS. Worked perfectly.
Tom