Forum Index

 
 FAQFAQ   SearchSearch   MemberlistMemberlist   UsergroupsUsergroups   RegisterRegister 
 ProfileProfile   Log in to check your private messagesLog in to check your private messages   Log inLog in 

The All (Now with 2018 model)

 
Post new topic   Reply to topic     Forum Index -> Journals: Log Your Ski Building Progress
View previous topic :: View next topic  
Author Message
Tobiasstaermose



Joined: 14 Apr 2016
Posts: 9

PostPosted: Wed Jan 17, 2018 1:05 pm    Post subject: The All (Now with 2018 model) Reply with quote

Hi!

In the summer of 2016 after my first two trips on ski, in the winter, i stumbled upon a video some one building skis, and I thought: I can do that to!!

So after a lot of research and lurking on this forum, e.g. reading that the "only" vac pump to get was a Thomas 2660. And how to bend edges.

I set out and build my first pair. As i'm building my second pair now i thought i get some photos up. So this is the first pair called: The All

Layup:
Base + edge
620g Triax glass
Core - Made with the best baltic birch plywood i can get. 12mm, tapered to ~2mm at the ends.
620g Triax glass
200g UD carbon stringer 50mm wide
120g "hexcell" woven glass



Cheers Smile


Last edited by Tobiasstaermose on Tue Apr 17, 2018 12:04 pm; edited 2 times in total
Back to top
View user's profile Send private message
Tobiasstaermose



Joined: 14 Apr 2016
Posts: 9

PostPosted: Wed Jan 17, 2018 1:06 pm    Post subject: Reply with quote

Here it is. Finally got the embedding working.





















My girl friend thinks im a bit crazy

















Back to top
View user's profile Send private message
Akiwi



Joined: 15 Jan 2015
Posts: 368
Location: Olching (Near Munich) Germany

PostPosted: Mon Jan 22, 2018 8:26 am    Post subject: Reply with quote

They look pretty damn god for first try. Where are you based? How is the plywood core working?
_________________
I am nobody. Nobody's perfect, so I must be perfect.
Back to top
View user's profile Send private message
Tobiasstaermose



Joined: 14 Apr 2016
Posts: 9

PostPosted: Mon Jan 22, 2018 11:51 am    Post subject: Reply with quote

I'm in Denmark (Aarhus) - One of the flattest places on earth.. the highest point in the county is 171m... So we have to go to Norway og the alps for snow..

I really like them!

Being that I have not been skiing for that long I dont have that much to compare to.

But they are by a long shot the most stable skis i have ridden, and i have never been able to go from edge to edge as with these. So i really think that the crossed layer nature of plywood (only the BEST PLYWOOD) helps a lot here Smile
Back to top
View user's profile Send private message
Tobiasstaermose



Joined: 14 Apr 2016
Posts: 9

PostPosted: Tue Apr 17, 2018 12:04 pm    Post subject: Reply with quote

So here is the 2018 model of The All, I call it the Carbon_Light.
Same Basic shape as last year, (103mm under foot), but the composit construction is made using carbon fibre. And they are 183cm, and the 2017 model was 173cm.

Layup:
Base + edge
320g Biax Carbon
Core - Made with the best baltic birch plywood i can get. 12mm, tapered to ~2mm at the ends.
320g Biax Carbon
160g Carbon Twill
120g "hexcell" woven glass

At the tip and tail i used a spacer made from the base, and one layer of 620g Triax Glass, i should have used a layer or two extra as the tip and tail are a bit flimsy Smile

They ride diffrently that the 2017 model, they seem very very nice in choped snow and fresh snow, but as I have nothing but carbon in the constuction they dont have much damping, so icy moring groomers are hard...
























Back to top
View user's profile Send private message
Akiwi



Joined: 15 Jan 2015
Posts: 368
Location: Olching (Near Munich) Germany

PostPosted: Sat Oct 27, 2018 12:17 pm    Post subject: Reply with quote

Love the highgloss finish on then , they look sweet!
_________________
I am nobody. Nobody's perfect, so I must be perfect.
Back to top
View user's profile Send private message
mammuth



Joined: 28 Oct 2014
Posts: 300
Location: somewhere in the alps

PostPosted: Sat Oct 27, 2018 1:18 pm    Post subject: Reply with quote

Did you use the carbon only as top layer for deco?


Btw. you are a brave man to do this inside the kitchen (the first pair) and you seem to have a very tolerant girlfriend Wink
_________________
Tom
Back to top
View user's profile Send private message
Tobiasstaermose



Joined: 14 Apr 2016
Posts: 9

PostPosted: Wed Oct 31, 2018 1:16 pm    Post subject: Reply with quote

mammuth wrote:
Did you use the carbon only as top layer for deco?


Btw. you are a brave man to do this inside the kitchen (the first pair) and you seem to have a very tolerant girlfriend Wink


Hi, no the main structure is from Bi-ax carbon fibre. This is the layup from the bottom up.

Layup:
Base + edge
320g Biax Carbon
Core - Made with the best baltic birch plywood i can get. 12mm, tapered to ~2mm at the ends.
320g Biax Carbon
160g Carbon Twill
120g "hexcell" woven glass

Best regards

Tobias
Back to top
View user's profile Send private message
Display posts from previous:   
Post new topic   Reply to topic     Forum Index -> Journals: Log Your Ski Building Progress All times are GMT - 8 Hours
Page 1 of 1

 
Jump to:  
You cannot post new topics in this forum
You cannot reply to topics in this forum
You cannot edit your posts in this forum
You cannot delete your posts in this forum
You cannot vote in polls in this forum


Powered by phpBB © 2001, 2005 phpBB Group