LifeIsRiding - your link goes to a page saying the video is unavailable, could you try posting it again?
Would love to check out your demonstration!
2.5d vs 3d CAM software
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
LifeisRiding
- Posts: 80
- Joined: Sat Sep 26, 2009 7:21 pm
- Location: British Columbia
-
LifeisRiding
- Posts: 80
- Joined: Sat Sep 26, 2009 7:21 pm
- Location: British Columbia
Here is a link if you want to see or download this model and change it up to make it your own. Its just a super basic shape but a really good starting point you can tweak and change.
http://a360.co/2jSDgkc
password is : love the pow
If you like it let me know, or like it on youtube. I can do more videos showing how I make all the individual parts of a snowboard including the layers, inserts, sidewalls etc...
We could even get into the other Fusion workspaces like CAM, so you can see what types of tool paths I use on my CNC to actually make the shapes.
http://a360.co/2jSDgkc
password is : love the pow
If you like it let me know, or like it on youtube. I can do more videos showing how I make all the individual parts of a snowboard including the layers, inserts, sidewalls etc...
We could even get into the other Fusion workspaces like CAM, so you can see what types of tool paths I use on my CNC to actually make the shapes.
That was very helpful! Thanks for taking the time to make that.
I'm about to lose the SolidWorks license I get through work and have been looking for an affordable replacement - Fusion360 looks like the way to go.
That would be awesome if you made additional videos - stuff like adding edges, sidewall bevel, CAM, etc. Just make sure to post an update here
I'm about to lose the SolidWorks license I get through work and have been looking for an affordable replacement - Fusion360 looks like the way to go.
That would be awesome if you made additional videos - stuff like adding edges, sidewall bevel, CAM, etc. Just make sure to post an update here