FS: Ski Press, Stone Grinder, Materials, etc.

For non-commerical sales of materials, equipment, and resources related to ski/snowboard building

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

User avatar
vinman
Posts: 1388
Joined: Fri Nov 09, 2007 4:16 pm
Location: The tin foil isle
Contact:

Post by vinman »

Willing to part out the materials? I'm interested in the VDS and a handful of inserts for a splitter in making. What are the sizes on the VDS width and inserts size?
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
SRP
Posts: 77
Joined: Fri Sep 22, 2006 8:24 am

Post by SRP »

Vinman,

I have a couple people interested in everything that's left, so let me see if anyone comes up with the money and I will let you know.

What size inserts do you need. I will check on sizing and see what I can come up with for you.

Scott
User avatar
vinman
Posts: 1388
Joined: Fri Nov 09, 2007 4:16 pm
Location: The tin foil isle
Contact:

Post by vinman »

I'm looking for 7mm inserts. I'd need about 20-25 or so.

Price on the VDS? Width?
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
User avatar
vinman
Posts: 1388
Joined: Fri Nov 09, 2007 4:16 pm
Location: The tin foil isle
Contact:

Post by vinman »

Scratch that. I need 30 inserts. 7 mm
Fighting gravity on a daily basis
www.Whiteroomcustomskis.com
SRP
Posts: 77
Joined: Fri Sep 22, 2006 8:24 am

Post by SRP »

Thanks everyone who purchased everything and was interested. Everything is sold.
Post Reply