SWITZERLAND : Workshop Sell Off [EDIT - ALL SOLD]

[dg]

Hi all - Dan Graf here, not built anything for years as my IT business and 2 children and move back to the UK took over life !

I'm now planning to sell off all my remaining material and machines. Between 19th November and 25th November 2016 I'll be selling off - prices negotiable :

Base material from Crown in Black or White - not sure how much is left - CHF 0.50 per metre
Sidewalls from Crown, various colours - CHF 10.00 per plank
Steel edges - masses of it for CHF 50.-
Inserts - hundreds of them with magnetic caps - for CHF 20.- the lot
Various bits of glass & carbonfibre

Reichmann snowboard grinding machine with side edger CHF 1500.-
Pneumatic steel press with heating CHF 500.-
320mm wide thickness planer CHF 200.-
500mm wide overhead drum sander with conveyor CHF 300.-
DeWalt bandsaw CHF 100.-
Various steel workbenches CHF 30.- each
Various steel cupboards CHF 10.- each
Scheppach wood clamping system for vertical lamination CHF 150.-
A drum kit (yeah really!) : CHF 50.00

Flums, Switzerland - 19th-25th November 2016

I guess this really works best for those located in or near Switzerland, I'm afraid I don't have enough time to be able to ship anything else overseas so it's really collection only [/b]

[Akiwi]

Hey Dan, where are you in Switzerland?
A lot of that sounds realy interesting.

[dg]

Hey Dan, where are you in Switzerland?
A lot of that sounds realy interesting.

In Flums, Kanton St.Gallen - I currently live in the UK but I'll be in Flums clearing out the workshop from 19th - 27th November.

[chrismp]

Sent you a pm!

[pmg]

Können wir 3 ja ne Fahrgemeinschaft machen :)

[dg]

Können wir 3 ja ne Fahrgemeinschaft machen

:-)

If you have a van with tail-lift it would be super easy to load even the heavy machines (press, base grinder, overhead drum sander) !

[Akiwi]

Können wir 3 ja ne Fahrgemeinschaft machen

Problem with that, is that then I wouldn't have so much room in my car!

[dg]

^^Press detail showing box with transformer and digital temperature controller



^^Press being unloaded, aluminium cat track, there are 2 firehoses with it



^^DeWalt Bandsaw, used for cutting off mould flash and general trimming work



^^You can see the Metabo DH330 thickness planer in the background on the left, Uwe is running a ski core through it





^^ Two views of Reichmann base grinder with side edger, multi-speed, water cooled, various belts of different grits and polish



^^Scheppach vertical lamination press - makes nice flat core blocks



^^Red machine on the left is the overhead drum sander - really cool for finishing the profiling, last few passes through here avoids incidents caused by the planer or router bridge when the core gets thin

[pmg]

If no one takes the Reichmann grinder you can sell it back to Reichmann afaik. They sell used machines.

[dg]

If no one takes the Reichmann grinder you can sell it back to Reichmann afaik. They sell used machines.

Yeah - I have a company lined up who will buy it from me, but if a ski / board builder takes it first I'm happier :-)

[dg]

Thanks to all who came to Flums today, pretty much all machinery and materials have found a new home

[Akiwi]

It was realy nice meeting you, and the other ski builders who turned up there. I am going to have to do a huge cleanup and re-organise in my workshop to fit the new babies in. Look forward to using them.