The Blak Sheep YT-1350 Superstretch
Blak Sheep YT-1350
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
knightsofnii
- Posts: 1148
- Joined: Tue Jan 08, 2008 6:02 am
- Location: NJ USA
- Contact:
-
knightsofnii
- Posts: 1148
- Joined: Tue Jan 08, 2008 6:02 am
- Location: NJ USA
- Contact:
About 161- 162 i believe. We built 4 of these with various base color combos.
The edges were tucked in and the tips were left square, 164-167cm, I forget what the total length was,
But they have DIY tips.
I used last yr proto 157 park stik as the base model, then just extended the tip shape to 24cm square ends.
Running length 116cm twin
Set back 2cm stance
Flat kick tip bend
Rocker between feet, camber from foot to tip curve.
Diecut base, used Donek D2 knife on shopbot PRS Alpha 48x96
Triax glass 19 oz
Core tips were chopped a bit to allow for more tip fill for diy tips
Parts built by me at www.themakerdepot.com
Laminated and partially finished at Homewood Snowboards in PA.
Finished back at home near Chinatown
Graphics by Chuck McLean
The edges were tucked in and the tips were left square, 164-167cm, I forget what the total length was,
But they have DIY tips.
I used last yr proto 157 park stik as the base model, then just extended the tip shape to 24cm square ends.
Running length 116cm twin
Set back 2cm stance
Flat kick tip bend
Rocker between feet, camber from foot to tip curve.
Diecut base, used Donek D2 knife on shopbot PRS Alpha 48x96
Triax glass 19 oz
Core tips were chopped a bit to allow for more tip fill for diy tips
Parts built by me at www.themakerdepot.com
Laminated and partially finished at Homewood Snowboards in PA.
Finished back at home near Chinatown
Graphics by Chuck McLean
Doug