UPDATE: Now For Sale in Adelaide!
My press build is here and is based on the Happy Monkey build:
viewtopic.php?t=2399
Since the photos it has been upgraded and now runs 2 ramp/soak controllers.
I've also got a bunch of materials. 2 or 3 machines cores. A couple core blanks. VDS. Unidirectional carbon (150m or so of 1" thick stuff). Black base material. Edges for say 8 boards. A fair few board sets worth of inserts. Some silky oak veneer if you're interested in that.
It's all located in Adelaide, SA and would need to be picked up. I'm looking for around $5,000 for the lot, can provide more details if anyone is genuinely interested.
Reply here, via email a dot blackburn at live dot com dot au or give me a ring on: zero four zero three one eight three one two one.
FS: I-Beam Press and Materials, Adelaide $5000
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
FS: I-Beam Press and Materials, Adelaide $5000
Last edited by Alex13 on Fri Oct 10, 2014 8:30 pm, edited 1 time in total.
SA, unfortunately 
I can shift it to Adelaide for collection as well. Work will pay to move it all over for me, so pickup can be Melbourne or Adelaide.
-edit- Veneer size is something like 360 x 2000 (mm). Plenty wide enough for one snowboard or two skis at least. There are several sheets. There's also some curly dark wood which is pretty dry and would need to be treated before use.
There's also glass, 740gsm triax if I recall correctly, enough for a few boards or sets of skis.
At this stage not really willing to part it all out. If anyone desperately needs something I'll consider helping you out as one builder to another, but not looking to sell off bits. If it doesn't all go I may as well keep it.
I can shift it to Adelaide for collection as well. Work will pay to move it all over for me, so pickup can be Melbourne or Adelaide.
-edit- Veneer size is something like 360 x 2000 (mm). Plenty wide enough for one snowboard or two skis at least. There are several sheets. There's also some curly dark wood which is pretty dry and would need to be treated before use.
There's also glass, 740gsm triax if I recall correctly, enough for a few boards or sets of skis.
At this stage not really willing to part it all out. If anyone desperately needs something I'll consider helping you out as one builder to another, but not looking to sell off bits. If it doesn't all go I may as well keep it.