HELP?!? Haha, dye sublimation press...

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

User avatar
MontuckyMadman
Posts: 2395
Joined: Fri Jun 20, 2008 9:41 pm

Post by MontuckyMadman »

4kw is what u want to get to 180c so gotta be 220v
Yes it works. .25 steel and .25 al x 2.
I didnt use any insulation but cement board is used by some.
Mdf would be smokey and it falls apart as some have said.

40 secs at 180 c gave good results on the nylon.
sammer wrote: I'm still a tang on top guy.
Post Reply