Ski Layup/Factory Tour Videos

Jibber · Post by **Jibber** » Wed Sep 18, 2013 11:17 am

Cheers, Christoph

szymon · Post by **szymon** » Wed Sep 18, 2013 9:46 pm

Faction skis - also madein Poland (Nobile factory).
I don't get one thing - he says that ski is made from balsa but they added some fiber to reinforce ski. He shows a blank core so the reinforcment is in the process of making core itself. I wonder what that is...Anyone?
I also spoke year ago with one of the owners, here in Poland and he said that the cores are made from balsa and PET (same as bottles) - maybe that goes to those holes under bingings? Is that to reinforce mounting places as the balsa would not give good support for binding screws?

Dtrain · Post by **Dtrain** » Wed Sep 18, 2013 10:11 pm

http://www.bcomp.ch/31-0-BcompCores.html

Here it is man.

szymon · Post by **szymon** » Thu Sep 19, 2013 3:01 am

Wow! Great - thanks Dtrain!
That looks very interesting - I'll contact them for sure!
Best!

skimann20 · Post by **skimann20** » Sun Oct 13, 2013 7:06 pm

Niche snowboards
haven't seen this one:

LifeisRiding · Post by **LifeisRiding** » Wed Jan 08, 2014 11:25 am

New Videos of the Trapper Factory in Nelson BC

Part 1

Part 2

Time lapse

szymon · Post by **szymon** » Mon Jan 27, 2014 4:47 am

Another video from Nobile, Poland

ben_mtl · Post by **ben_mtl** » Mon Jan 27, 2014 7:51 am

LifeisRiding wrote:New Videos of the Trapper Factory in Nelson BC

Part 1

Part 2

Time lapse

Aren't Trapper up in Revy ?

Richuk · Post by **Richuk** » Thu Jan 30, 2014 8:46 am

falls · Post by **falls** » Sat Feb 08, 2014 3:59 pm

that Trapper boards timelpase video is worth a watch!

skimann20 · Post by **skimann20** » Sat Mar 01, 2014 7:47 am

what the heck did he do at 1:10? thats new. I also like how he hangs them after splitting them, not sure why he was pounding the screwdriver in the flashing?

jeff@shaggys · Post by **jeff@shaggys** » Sat Mar 01, 2014 12:53 pm

Base die cut at 1:10, tough to do with pressure that low.

falls · Post by **falls** » Sat Mar 01, 2014 5:16 pm

I think from memory he was cracking away excess epoxy so the clamps will fit on (throat depth of the clamp). edit: No thats when he hits it with the mallet.
I think the screwdriver is helping free the skis from the metal upright pins on the cassette that help with allignment.

skimann20 · Post by **skimann20** » Sun Mar 02, 2014 7:11 am

best sidewall profiler I've ever seen!!!

skidesmond · Post by **skidesmond** » Sun Mar 02, 2014 10:06 am

I think MM uses that method and swears by it.

Ski Builders Forum

Ski Builders Forum

Ski Layup/Factory Tour Videos

New Videos of the Trapper Factory in Nelson BC

Re: New Videos of the Trapper Factory in Nelson BC