Die cut base cnc

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
West1234
Posts: 6
Joined: Sat Oct 06, 2012 1:59 am

Die cut base cnc

Post by West1234 »

Any one know some one who does this in Washington near seattle?
Top
twizzstyle
Posts: 2207
Joined: Tue Mar 07, 2006 8:25 pm
Location: Kenmore, Wa USA

Post by twizzstyle »

I drag-knife my bases on my CNC (I'm in Kenmore). Unfortunately I have basically zero free time these days, so I can't offer to cut bases for you at this time.
Top
twizzstyle
Posts: 2207
Joined: Tue Mar 07, 2006 8:25 pm
Location: Kenmore, Wa USA

Post by twizzstyle »

Also, for what its worth, you really don't want to be cutting out your bases until you're pretty much ready for layup. The plastic can change shape a lot over even a little bit of time, and you'll get funny-shaped skis. You probably don't want someone else cutting out your bases, and then letting them sit for a while.

It will probably cost the same to just get an MDF template made that you can cut the bases out with a router.
Top
Post Reply

Return to “Ski/Snowboard Design and Layup”