I been following this forum reading and learning for over a year and finally decided to build my first board. I would like to thank this great forum and the people that contribute and help newbie like me.
Here the Core
Mess up 3 core and finally almost got it
I staple the tip spacer work great
Duce First Board.
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
gluing the edge
My adjustable Press
The press in Action( I press around 35-40 psi)
Fresh out of the press
Cutting and sanding
My sidewall router
The finally product
The graphic is from some site I found online. I use Chrismp method for the graphic.
I misaligned the binding insert. So I have to redrill the insert and now its ready to ride. Can't wait to test it
My adjustable Press
The press in Action( I press around 35-40 psi)
Fresh out of the press
Cutting and sanding
My sidewall router
The finally product
The graphic is from some site I found online. I use Chrismp method for the graphic.
I misaligned the binding insert. So I have to redrill the insert and now its ready to ride. Can't wait to test it