inserts
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
inserts
hey everyone, i just received my order of inserts and was wondering if any of you would be interested in purchasing my leftovers. they feature the following:
- 9mm in height
- 1/4-20 threads
- magnetized caps for easy locating
- $0.30 a piece
please send an e-mail if you're interested. thanks.
- 9mm in height
- 1/4-20 threads
- magnetized caps for easy locating
- $0.30 a piece
please send an e-mail if you're interested. thanks.
- Kam S Leang (aka Little Kam)
I have 1/4-20 screws but the heads are actually too large for the G3 riser holes. You'll have to grind them down a little bit or drill out your riser. If you can't find 1/4-20 screws over there I'd be glad to stop by my local lumber store and see if they have any screws that will fit. Most of them are phillips style heads. However, they do have some hex heads but they're over $1.00 (US) a piece. Just let me know what length you're looking for and I'll dig around.
- Kam S Leang (aka Little Kam)
yeah M6 will not fit the 1/4-20 thread correctly. i just came back from the local store and they have do have hex screws that will fit the G3 riser. but the problem is that they're made from regular steel and not stainless steel. so they will rust. these are about $1.80 for a set of four.
they also have the flat and oval screws but those come with a phillips drive and will require modification to the screw heads (too big for the riser) or to your riser. these are about $1.00 for a set of four.
another option is to find them online some where.
i have about 300 inserts left so there's plenty available.
they also have the flat and oval screws but those come with a phillips drive and will require modification to the screw heads (too big for the riser) or to your riser. these are about $1.00 for a set of four.
another option is to find them online some where.
i have about 300 inserts left so there's plenty available.
- Kam S Leang (aka Little Kam)
50 sounds great. inserts are pretty much all i have available for sell. i just used up my last ABS/P-Tex sidewalls and tipspacer material for my last pair and will probably stop using them in the future. i think it may be possible to use extra base material for your tipspacers as well.
i do know that Kelvin has edges for sale, however.
if you still would like the inserts send me a PM or e-mail. we can set something up.
i do know that Kelvin has edges for sale, however.
if you still would like the inserts send me a PM or e-mail. we can set something up.
- Kam S Leang (aka Little Kam)