I think around $150 for the materials and $300 for the press.
Material is:
triaxial 22oz 25" wide qty2
rubber vibration dampening strip 25mm wide qty 8
p-tex base material 4001 grade, 30cm wide, 1.3mm thick qty 2
top sheet 30cm wide, .075mm thick qty 2
sidewall material p-tex 60mmx12.7mmx165cm qty 1
tip/tail spacer material p-tex 12"x12"x2mm qty 1
I also have some ski builders stickers to throw in to the buyer.
The press has never been used because I didn't make a mould or get a fire hose. It is made from 2x2" steel tubing and 1/2" threaded rod. More braces could be easily added if needed. Also if there is not enough room to place your cat track, etc you can eaily add longer threaded rod to accommodate your needs. I primed it and painted it black to prevent rust and to make it look better. There are four casters on it for easy moving.
