Snowcad problem

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
bullion mine
Posts: 27
Joined: Sat Nov 14, 2009 7:39 am
Location: Montezuma, Co

Snowcad problem

Post by bullion mine »

I use snowcad to run a CNC to cut my bases and the radius on 1 side of the ski is slightly different than the other side. It is about the thickness of the edge (1.5mm) so when you put the skis together base-to-base they do not match. Has anyone had this problem?
Top
Post Reply

Return to “Ski/Snowboard Design and Layup”