A new press is born

Document your personal work here. Show photos, movies, and share your secrets.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
skidesmond
Posts: 2338
Joined: Tue Apr 07, 2009 3:26 pm
Location: Western Mass, USA
Contact:
Contact skidesmond

Post by skidesmond »

Another question about the veneering.... Did the veneer already have a square edge or did you have to cut the edge to get the seam to match. The veneer I get is in raw form so I'd have to square it up. Tips on how you did squared iti up, if you did? Thanks.
Top
COsurfer
Posts: 357
Joined: Sun Jul 11, 2010 1:42 pm
Location: Evergreen, CO

Post by COsurfer »

Luckily, the veneers already have a nice edge on them. All of the veneers from this place are precut: http://www.wood-veneers.com/.
Top
skidesmond
Posts: 2338
Joined: Tue Apr 07, 2009 3:26 pm
Location: Western Mass, USA
Contact:
Contact skidesmond

Post by skidesmond »

Thanks. Prices look decent too.
Top
Post Reply

Return to “Journals: Log Your Ski Building Progress”