For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.
Moderators: Head Monkey , kelvin , bigKam , skidesmond , chrismp
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Tue Apr 05, 2011 5:47 pm
We'll see if I went to0 detailed in about a week haha, this picture is HUGE, it's only 5x5 so if you step back from the monitor and squint, well, you get the idea
Last edited by
Brazen on Tue Apr 05, 2011 7:49 pm, edited 1 time in total.
"86% of the time it works 100% of the time".
MontuckyMadman
Posts: 2395 Joined: Fri Jun 20, 2008 9:41 pm
Post
by MontuckyMadman Tue Apr 05, 2011 7:24 pm
you gonna like pour foam rubber in there er what?
sammer wrote:
I'm still a tang on top guy.
Brazen
Posts: 841 Joined: Thu Nov 25, 2010 11:26 amLocation: San Bernardino, CA
Contact:
Post
by Brazen Tue Apr 05, 2011 7:48 pm
I'm not sure. There's a company called Alumilite that sells all kinds of casting silicone...I'm ordering 2 different durometers of them.
