Hi
I have had a look on the forum and I was looking for the basic dimensions of a ski press for a 1st attempt. I'm not looking for anything fancy just something to get me started to make a pair of 175's.
Apologies if this has already been posted before.
Thanks,
David
Ski Press for Beginner
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
twizzstyle
- Posts: 2207
- Joined: Tue Mar 07, 2006 8:25 pm
- Location: Kenmore, Wa USA
This is something you can (and should) work out on your own.
You want a 175cm ski. Sketch up your mold and figure out how big it needs to be for that length of ski. Then consider room for the fire hose, cattrack if you use one, top mold, etc, and the press dimensions will fall out from that.
Good luck!
You want a 175cm ski. Sketch up your mold and figure out how big it needs to be for that length of ski. Then consider room for the fire hose, cattrack if you use one, top mold, etc, and the press dimensions will fall out from that.
Good luck!