Process of hand finishing a base

For discussions related to ski/snowboard construction/design methods and techniques.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
nearls
Posts: 33
Joined: Sat Dec 11, 2010 2:42 pm
Location: Monakirks
Contact:
Contact nearls

Process of hand finishing a base

Post by nearls »

Howdy,

Wondering what the usual sequence of events might be for hand finishing a base. My project has an intentionally contoured base so taking to the shop likely won't work. Belt Sander? Wet sand? What grits to start and finish at? Thanks.
Top
User avatar
MontuckyMadman
Posts: 2395
Joined: Fri Jun 20, 2008 9:41 pm

Post by MontuckyMadman »

Hey man go to tgr forum and pm marshall olsen. He did the hand finish on the new dps convex base. Seriously he may be the best authority on this.
Top
nearls
Posts: 33
Joined: Sat Dec 11, 2010 2:42 pm
Location: Monakirks
Contact:
Contact nearls

Post by nearls »

Found this on the tognar site. Has quite a bit of info. Tried Marshall Olsen but no word back.

http://tognar.com/base_flat_tips_inform ... board.html
Top
Post Reply

Return to “Ski/Snowboard Design and Layup”