Thanks!)
Yes the basic letters are drawn by an acrylic paint. The first letter "M" - duecut. delamination didn't occur) previous pair of skis has broken because of woodcore) has managed to remove base and to use it again)
Used in one ski I become blue resin on base.
I use a usual acrylic paint for damp conditions) works well). If to do letters won't come off)
On last skis base has been completely processed by an acrylic paint. Can on it and could remove base?) though hardly)))
Cool skis!
Can you confirm that the PVC tip&tail not delaminate? If not, will you please share your approach? You don't have to do it right away.
My tests hasn't been that successful...
No, fire didn't use.
Can at us it is simple more porous material sell?)
The material in a cut on structure is similar to plaster. On a photo of it I can not catch.
The material breaks at a bend approximately in 100 degrees. On a frost of properties visually doesn't change.
Also breaks not on a seam.
If to heat resin that it is possible to produce dismantling. Plus used the tool of type of a chisel
As that has helped that base has been painted.
If you are interested pvc sidewalls that I advise a little to wait with it) like problems with it start to appear at temperature more low-25...-30 degrees on Celsius