2.5mm edges

gketcham · Post by **gketcham** » Thu Sep 16, 2010 2:17 pm

I am noticing a lot of the independent ski companies are using 2.5mm edges. Does anyone know where I can get some edges this fat? I have not found them anywhere. Thanks

grace ski · Post by **grace ski** » Wed Sep 22, 2010 10:52 am

I was looking for the same edge (2.5) I had a discussion with the crew at Folsom Skis about it. They used to use those(2.5) and have dropped down to a 2.0 with a 1.3MM step. ( i believe) They dont have any problems with the smaller size and they save weight. I just ordered some 1.3mm step edges and the flanges are small! I will give them a shot and see what happens.

there are only two edge manufacturers in the world as far as i know. I looked into (as did others) getting them tooled here in the states. The price couldnt be matched at $3-4 an edge. The tooling cost is crazy high.

We all might have to deal with CDW:http://www.cdw.de/Products/Profiles/1_334.html

good luck. I have the profile sheets and PDF with onfo if you want it

gketcham · Post by **gketcham** » Thu Oct 14, 2010 9:59 pm

Sorry I never thanked you for the info, but did you happen to ask Folsom Custom where they got the fatty edge? It just seems like that size would be a beefier stronger edge against core shots and stupid jibs in powder. I could very well be wrong though.

ruudsjoukes · Post by **ruudsjoukes** » Wed Nov 10, 2010 11:18 am

CDW has them.

richie · Post by **richie** » Wed Nov 10, 2010 4:38 pm

Hi Guys, now my press is complete I'm starting to accumulate materials. From offshore I need base material and tip/tail and have been in touch with Crown Plastics so thats covered, inserts I have sorted, only other think I need offshore is edges and I would like to start with something meaty - my young boy is hard on his skis , and typical NZ ski field off-piste its pretty easy to find a good rock. So for my kind of volume I really only need to get hold of 10-20 edges to get me started. I have a US CA address to send goods to, would someone be able help me out here? I am happy to pay a small premium considering the effort and time this would take.

Thanks
Rich

ruudsjoukes · Post by **ruudsjoukes** » Wed Nov 10, 2010 4:46 pm

Contact Mark Zajac, he's doing sales at CDW edges.
mark@cdw-db.com

The edges available are in the last post of this thread, click and download the file:
http://www.skibuilders.com/phpBB2/viewt ... 6&start=30

I sorted out the info and asked him for a total package price included the shipping of 50 edges to Canada, costed me $220 which is 80$ freight and 7,somthing tax.
Hope this helps, GL.

richie · Post by **richie** » Wed Nov 10, 2010 5:15 pm

sweet thats a pretty good deal, thanks for the contact details. I tried downloading that pdf but its pretty high level about CDW profiles and no detailed edges specs???? Did I get the wrong one? cheers, Rich

richie · Post by **richie** » Wed Nov 10, 2010 5:18 pm

sorry found the link, all good, thanks mate!

Richuk · Post by **Richuk** » Mon Nov 15, 2010 4:35 am

Rudds, was your order for pre-formed or straight edge sets? Thks

ruudsjoukes · Post by **ruudsjoukes** » Mon Nov 15, 2010 8:08 am

Just standard edge, the 2,5 by 2,5mm

Buuk · Post by **Buuk** » Wed Nov 17, 2010 11:58 pm

I can only help you with some 2.0 x 2.15 mm edges. These are already fatter than the regular onces used by most companies.

Buuk

Ski Builders Forum

Ski Builders Forum

2.5mm edges

2.5mm edges

I cant either

2.5mm edges for NZ

thanks

sorry found the link, all good, thanks mate!