this is interesting from praxis: concept ski

MontuckyMadman · Post by **MontuckyMadman** » Sat Jun 05, 2010 3:43 pm

http://praxisskis.com/index.php?page=sh ... &Itemid=70

doughboyshredder · Post by **doughboyshredder** » Sat Jun 05, 2010 4:39 pm

Pretty cool take on the multiple contact point ( Magnetraction ) edge concept. Makes me think even more about building a board with the straight sections of my straight line sidecut just a tad reversed.

Merlinm · Post by **Merlinm** » Thu Jun 10, 2010 10:18 am

on this link pictures found on praxis web site

http://www.skipass.com/forums/sports/sk ... 11604.html

i hope it's a new turn on the evolution of ski

MontuckyMadman · Post by **MontuckyMadman** » Thu Jun 10, 2010 11:32 am

Merlinm · Post by **Merlinm** » Thu Jun 10, 2010 12:07 pm

perhaps partsof the sidecut beetwen the 3 contact points should have round edge or no edge at all, specially the reverse parts in front of the bumps...
hum I'm rather 0 im tech talk on an other language than french

doughboyshredder · Post by **doughboyshredder** » Thu Jun 10, 2010 3:16 pm

almost identical to Burton's pressure edge.

Ski Builders Forum

Ski Builders Forum

this is interesting from praxis: concept ski

this is interesting from praxis: concept ski