Any vacuum baggers build a heat box...

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
kfarrar
Posts: 3
Joined: Fri Oct 17, 2008 6:34 am

Any vacuum baggers build a heat box...

Post by kfarrar »

to cure the epoxy at 175-190 degrees.

If so, how did you do it?

Thanks,

Kevin
Top
heliski989
Posts: 117
Joined: Sat Jan 27, 2007 8:29 pm
Location: Denver, CO
Contact:
Contact heliski989

Post by heliski989 »

I gave one to NICK about 6 months ago. Send him a PM for pics.

Basically a 2" foam box with 2-120v hooked to a dimmer switch and a temp. probe.

it was big enough to fit over a mold and got up to heat in about 10 min.
Top
Post Reply

Return to “Equipment and Tools (e.g., ski press, core profiler, etc)”