i've found very interesting information about increasing adhesion for PE
in general, the idea is to use an Carbon Infra Red Heating Lamps instead of Flame Treatment.
check this out
damn! i want to try
IR heating instead of Flame treatment
Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp
-
SovietBear
- Posts: 3
- Joined: Tue Nov 03, 2009 1:50 pm
- Location: Nikolaev, Ukraine
IR heating instead of Flame treatment
hi guys!
i've found very interesting information about increasing adhesion for PE
in general, the idea is to use an Carbon Infra Red Heating Lamps instead of Flame Treatment.
check this out
damn! i want to try
i've found very interesting information about increasing adhesion for PE
in general, the idea is to use an Carbon Infra Red Heating Lamps instead of Flame Treatment.
check this out
damn! i want to try
Last edited by SovietBear on Mon Nov 23, 2009 1:34 am, edited 1 time in total.
I don't think that study is relevant. They talk about using IR heat to activate an adhesive. Ie appy glue, heat, glue bonds. It bears much more similarity to heating your press in order achieve faster epoxy set times.
This is much different than flame treating Ptex to oxidize it and allow it to bond with epoxy.
This is much different than flame treating Ptex to oxidize it and allow it to bond with epoxy.