Vinyl Cutter

For discussions related to designing and making ski/snowboard-building equipment, such as presses, core profilers, edge benders, etc.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
bobbyrobie
Posts: 124
Joined: Wed Sep 17, 2008 9:17 pm

Vinyl Cutter

Post by bobbyrobie »

how about using a vinyl cutter to cut base material? or at least make an accurate cutting line? just an idea. i don't think their would be enough pressure on the blade to cut, but i was curious what others think.
Top
Yuki_otoko
Posts: 31
Joined: Sun Apr 13, 2008 1:08 am

Post by Yuki_otoko »

My brother has a vinyl cutter, and there is no way will it cut anything near the thickness as base.
Its good for cutting masks for painting graphics though.
Top
Post Reply

Return to “Equipment and Tools (e.g., ski press, core profiler, etc)”