yeah

Document your personal work here. Show photos, movies, and share your secrets.

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
Three31
Posts: 70
Joined: Wed Oct 10, 2007 3:20 pm
Location: North Tahoe

yeah

Post by Three31 »

Finally finished getting everything set up in my new garage (moved from Tahoe to Reno for School), and made some time to press some boards out.

Image
Lots of Love

Image

Image

Image

Image
The core is thicker than the tip spacer, so added a couple of pieces of glass for the transition.

Image

Image

Image

Image
--Never thought I'd see my last name on a pair of skis--

Image
Heating up

Image
Ready to cut.

-----------------
Kam,
Once I got started, I had to keep running.
-----------------
Brian
User avatar
MontuckyMadman
Posts: 2395
Joined: Fri Jun 20, 2008 9:41 pm

Post by MontuckyMadman »

ROCKIN'!!!
User avatar
brandt
Posts: 19
Joined: Tue Oct 07, 2008 7:59 am
Location: Stockholm, Sweden

Post by brandt »

Really sweet graphics.
Three31
Posts: 70
Joined: Wed Oct 10, 2007 3:20 pm
Location: North Tahoe

Post by Three31 »

Thanks, its taken a lot of work.

Here they are cut out.
Image
Brian
allyson
Posts: 43
Joined: Mon Jan 31, 2005 7:48 pm
Location: reno, nv

Post by allyson »

brian, those skis look awesome!!! now...if only there was some snow around here to test them on... ;)
Mongo
Posts: 60
Joined: Wed Jun 07, 2006 9:24 am
Location: Wedell Skis Lab

Post by Mongo »

Excellent looking skis. What was the thickness difference between your core and tipspacer that you stepped with the glass? How did the fit come out?

Second question, who did you use to print your topsheet graphics and what material is it?

Keep up the solid work.
Grizzly Adams
Posts: 59
Joined: Mon Feb 25, 2008 4:26 am
Location: WY

Post by Grizzly Adams »

Killer skis, Killer moustache!
Its a good thing cold smoke doesn't give you cancer.
Three31
Posts: 70
Joined: Wed Oct 10, 2007 3:20 pm
Location: North Tahoe

Post by Three31 »

The core to tip spacer step was about 2.5 mm, and it came out smooth. Used 2 pieces of glass, one about 2 inches long and another 4 inch piece over that.

I had the graphics printed here in Reno at Moment.
You can also get topsheet printed through snowboardmaterials.com

The material is PBT.

Thanks, the moustache takes a bit of work too, but its worth it!
Brian
Post Reply