Excess Stuff For Sale

For non-commerical sales of materials, equipment, and resources related to ski/snowboard building

Moderators: Head Monkey, kelvin, bigKam, skidesmond, chrismp

Post Reply
splat
Posts: 24
Joined: Sun Apr 17, 2005 10:24 pm

Excess Stuff For Sale

Post by splat »

I have some R48 edges (203cm), QCM epoxy and hardener (3.5 galllons), a delta 14" bandsaw, and a disc sander that was used for sidewall finishing for sale in Reno. If anyone is interested, you can reach me at patATpmgearusa.com
User avatar
littleKam
Site Admin
Posts: 269
Joined: Mon Dec 13, 2004 7:43 pm
Location: SoCal

Post by littleKam »

you're done pressing all the Bro's already? :)
- Kam S Leang (aka Little Kam)
splat
Posts: 24
Joined: Sun Apr 17, 2005 10:24 pm

Post by splat »

Oh, hell no. Just trying to free up space since moving into our new shop and getting new equipment, prebent edges, new resins, etc. Drop by Kams.
User avatar
zachjowi
Posts: 110
Joined: Sat Aug 26, 2006 10:41 am
Location: WI

Post by zachjowi »

any idea on prices?
splat
Posts: 24
Joined: Sun Apr 17, 2005 10:24 pm

Post by splat »

$400 on the bandsaw with some new 10 tpi blades
$65 on the disc sander (10", I believe) extra discs included
$5 an edge, prefer to dump all at once (about 20 of them)
$100 for the resin
I also have a bunch of bases I'd love to dump. Cut crooked (they actually tweaked after cutting due to tension in the palstic) they are for 179 and 188 Bros, 125-99-114 on both lengths.

I don't have time to parcel out this stuff in bits and pieces and really don't have time to ship becasue we are hauling ass to get skis out on a deadline for which we are very late, so if anyone wants this stuff, it'd be nice if they stopped by and picked it up. We're in Reno.
User avatar
littleKam
Site Admin
Posts: 269
Joined: Mon Dec 13, 2004 7:43 pm
Location: SoCal

Post by littleKam »

Yeah I'd like to stop by some time but it's quite a ways from SoCal. Unless it snows then it might be another good incentive to head out there.
- Kam S Leang (aka Little Kam)
NVirus
Posts: 6
Joined: Thu Dec 29, 2005 4:26 pm
Location: Wilkes-Barre PA
Contact:

Post by NVirus »

I am interested in the resin and hardner how much shipped to PA (18701)?
splat
Posts: 24
Joined: Sun Apr 17, 2005 10:24 pm

Post by splat »

Sorry, man, that was six months ago....
Post Reply